GE LOGIQe: Step 2 - Image Settings

Setup Imaging Preset Settings

1. Begin new Exam
   1. Select B mode (B key on extended keyboard)
   2. Be sure Harmonics are off by toggling the H key.  
      1. Harmonics are on if the top right setting displays a "CHI" next to the 'B'
   3. Preset key
   4. Select application 'MSK'
   5. Save 'New'
   6. name it 'MuscleSound' 
   7. Overwrite desired preset
   8. Save
   9. Exit
   10. If 'CHI' is displayed, toggle H key, then overwrite the preset
   11. Utility key
       1. Imaging
          1. B
          2. Preset 'MuscleSound'
             1. B/M Acoustic Output %: 100
             2. No Image Reverse
             3. B Color: Tint Map D
             4. Thermal Index: Tls
             5. ATO Level: Medium
             6. Softener: Low
             7. Focus Number: 2
             8. Focus Number CrossXBeam: 2
             9. Focus Width: Wide
             10. Focus Depth %: 52
             11. Depth: 3.5
             12. Compression: 1
             13. Line Density: 3
             14. Line Density Zoom: 3
             15. Suppression: 1
             16. Frame Average: 2
             17. Frame Average CrossXBeam: 1
             18. CrossXBeam: Yes
             19. CrossXBeam #: Low
             20. Compound Type: Mean
             21. Auto Optimize Mode: ATO
             22. Edge Enhance: 3
             23. Width: 1
             24. Gray Scale Map: BC_GRAYD
             25. Gain: 60
             26. Dynamic Range: 66
             27. Virtual Convex: No
             28. Rejection: 0
             29. Frequency: 12
             30. AutoLine Density: No
             31. SRI HD: 3
             32. Gamma: None
             33. Image Size: Small
             34. Image Style: Top